AEROMOS QUATRO IP

SPECIFICATIONS

4x LED INDICATOR

4x MIC OUT (TO STUDIO)

4x MIC ON-AIR ARM

There are 4 methods to work with MOS Quatro IP:

• TCP COMMANDS / STRINGS
• TELOS AXIA X-NODE / LIVEWIRE DRIVER
• TELOS AXIA QOR/IQ/IQX
• DHD LOGIC

12VDC POWER INPUT

DESCRIPTION

Suitable for signaling 4 on-air lamps for microphones. e.g. YELLOWTEC MIKA ON-AIR MIC ARM.

There are 4 methods to work with MOS Quatro IP:

• TCP COMMANDS / STRINGS
• TELOS AXIA X-NODE / LIVEWIRE DRIVER
• TELOS AXIA QOR/IQ/IQX
• DHD LOGIC

ON-AIR: red
OFF-AIR: white

STATUS LED INDICATOR
The LED will light up when the 12VDC power supply is present.

12VDC POWER INPUT
Ratings: 12VDC (9~18 volt) at 250mA. The polarity is not important
Power supply is included, options: 115V/USA – 230V/AUS – 230V/EUR – 230V/UK

4x MIC OUT (TO STUDIO)
Microphone output; connect to your equipment with standard MIC cable
(XLR 3pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)

4x MIC ONAIR ARM
Connect to the MIC ON-AIR ARM with standard MIC cable (XLR 5pin)
– PIN1: Ground (Shield)
– PIN2: Positive (Red)
– PIN3: Negative (Blue)
– PIN4: LED (Yellow)
– PIN5: LED (Black)

We have developed a test application which you can download here.

More info can be found in our manual.